Introduction

At the recently concluded HostMilano exhibition in Italy (October 17–21), Bestware's patented spray valve introduced in 2020 became a highlight of the show. It was adopted by numerous globally recognized kitchen equipment brands as the standard configuration for their pre rinse faucets, signaling the rapid replacement of conventional spray valves that have remained unchanged for decades, and establishing Bestware as the emerging industry preference. Constructed with SUS304 stainless steel, the spray valve delivers outstanding structural strength and long-lasting durability. Its integrated dual-function knob allows users to seamlessly rotate between powerful washing and large-area washing, ensuring intuitive and highly efficient operation. Test results show that, compared with conventional spray valves on the market, this model reduces operational fatigue by 75% and increases rinsing efficiency by 300%. With unmatched performance in durability, rinsing efficiency, and ergonomic design, it has become the globally recognized benchmark for innovation in the industry.
 

Performance Revolution: Comparing Old and New Spray Valves

In the pre rinse industry, conventional spray valves have dominated the mainstream market for decades. Yet their shortcomings have long been apparent. Over the years, their design and functionality have remained largely unchanged. Ergonomic considerations were rarely incorporated, resulting in user fatigue and low rinsing efficiency. Moreover, limitations in materials and manufacturing processes meant that prolonged use often led to damage, making them unsuitable for the high-frequency, high-wear demands of commercial kitchens. Innovation, therefore, became inevitable.

Recognizing this long-standing industry pain point, Bestware leveraged years of technical expertise to mount a transformative challenge to conventional spray valves. In 2020, it successfully developed a groundbreaking spray valve that dramatically enhances cleaning efficiency and is perfectly suited for the rigorous demands of high-frequency, high-wear commercial kitchen environments.

                                                        Pain to Selling Points

Core Technologies: Four Key Designs for the Ultimate User Experience

1. Hydraulic Cushioning Design

By incorporating an innovative hydraulic cushioning structure, this spray valve reduces user muscle fatigue by up to 75% compared with conventional models, allowing for prolonged use without discomfort. At the same time, it minimizes water hammer effects, effectively protecting kitchen pipelines.

2. Dual Water Flow Modes

Equipped with dual water flow modes, the spray valve allows users to effortlessly rotate between powerful washing and large-area washing without disassembly, meeting diverse cleaning requirements.

3. Nozzle Calibration

The angles and heights of the 24 water outlets have been rigorously calculated and fine-tuned. Each nozzle is precisely positioned to deliver water accurately to the target area for highly efficient cleaning while reducing user effort. Based on natural arm posture and line of sight during standing operation, the nozzle outlets are meticulously calibrated to ensure optimal precision, comfort, and productivity.

4. Smooth Valve Stem Sealing Surface

Unlike non-optimized designs on the market, the valve stem sealing surface of the new-generation spray valve is mirror-polished. This significantly lowers the friction coefficient as water passes through, reducing wear, enhancing durability and stability, and improving operational smoothness for a more efficient cleaning experience.

With over 13 years of experience in stainless steel commercial faucet manufacturing, Bestware employs CNC machining capable of micron-level precision.

Industry Impact: Driving Transformation in Commercial Kitchen Pre Rinse Solutions

As a bellwether for the industry, HostMilano has witnessed a transformation in the pre rinse faucet sector sparked by Bestware's spray valve. Numerous leading international commercial kitchen brands have embraced it, reflecting its tangible performance advantages and commercial value.

For commercial kitchens, efficiency and cost control are essential to maintaining competitiveness. Conventional spray valves, after prolonged use, often reveal multiple shortcomings that hinder pre rinse efficiency. Bestware's spray valve precisely addresses these pain points. In Europe, where labor costs are exceptionally high, users must streamline every part of their workflow. Cleaning, as an important part of daily operations, directly affects overall operational profitability. Conventional spray valves are labor-intensive to operate, causing staff fatigue during extended use. This results in slower cleaning speeds and inconsistent rinse quality. Bestware's spray valve leverages advanced ergonomic engineering to significantly reduce strain on the user's arm. In practical tests, users experienced noticeably lower fatigue levels, and cleaning efficiency improved by nearly 60%. This means more cleaning tasks can be completed in the same amount of time, directly reducing labor costs for users.

Environmental regulations are becoming increasingly stringent, posing a significant challenge. Conventional brass spray valves contain lead and can cause certain environmental impacts during production and use. Bestware's spray valves are made entirely from SUS304 stainless steel, a material that not only meets environmental standards but also offers high corrosion resistance and superior strength. In high-frequency, high-wear commercial kitchen environments, SUS304 stainless steel valves are more durable, reducing both the frequency of equipment replacement and maintenance costs. According to Australian clients, adopting Bestware spray valves has reduced equipment maintenance expenses by approximately 33%, while significantly minimizing downtime caused by equipment failures, ensuring uninterrupted kitchen operations.

After conducting an in-depth market study, the R&D Director of a leading German commercial kitchen equipment brand decided to fully adopt Bestware's spray valves in their pre rinse faucets. He stated: "We have always been committed to providing our clients with high-quality, high-efficiency commercial kitchen equipment. After comparing multiple spray valves on the market, the advantages of Bestware's spray valve are clear. Its high cleaning efficiency meets our clients' stringent requirements for kitchen hygiene and operational efficiency." After adopting this brand's pre rinse faucets equipped with Bestware spray valves, a major restaurant chain reported that kitchen cleaning became noticeably easier and more efficient. Residues and grease were removed quickly, significantly improving overall kitchen productivity. Moreover, thanks to the spray valve's durability, the frequency of equipment replacement was reduced, lowering maintenance costs and greatly enhancing the restaurant's operational efficiency.

Conclusion

Bestware's spray valve was showcased at HostMilano. It was adopted by multiple renowned brands and received widespread acclaim from the market. This marks a significant breakthrough in the pre rinse faucet industry. The spray valve not only leads the industry in durability, rinsing efficiency, and ergonomic design, but also leverages meticulous user insight and precise engineering to gradually replace conventional old-style spray valves, becoming the next-generation mainstream choice. It delivers a more efficient, comfortable, and environmentally friendly cleaning experience for commercial kitchens.

Note

Brass has long dominated the industry. However, with growing concerns for environmental protection and health, stainless steel has increasingly become the preferred option. Stainless steel is not only lead-free and safe, but also hard, durable, corrosion-resistant, and easy to clean—making it far more suitable than brass for high-frequency, high-wear commercial environments. These characteristics deliver significant benefits to clients, such as reduced maintenance costs and extended product lifespan. In 2015, Bestware became the world's first factory to achieve mass production of all-stainless steel commercial faucets, breaking the long-standing market dominance of brass. Over the years, leveraging its proprietary core technologies, Bestware has driven industry innovation, establishing itself as the earliest and most advanced integrated R&D, production and sales manufacturer in the stainless steel commercial faucet sector.